Parting out: My full MX crf 450..look here!!

[crap-banshee32]

well...its not selling as a whole...so i have decided to part it out.
hope i get most of my money back this way.
these prices are without shipping. but are negotiable a little.
Here is the big things i have.
i also have way more on the quad...just ask me if i have something your looking for...b/c i prob do, its just not listed

Brand new Arens Crf/ex conversion frame with radiator and motor mounts--$1500

2003 CRF 450 motor with about 10 hours on it..comes with carb and electrical. $2600. motor is now on e-bay, now is your chance to bid on it and get it a little cheaper tham im asking here.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7901646170&category=35572

Herrmann +3 LT arms, only 4 rides on them..red bottom silver top, w/ tie rods--$600

PEP rebuild 400ex rear shock for 200lbs rider--$200

Crosseyed +1 1/4 swinger...fresh pc...--$280

Lsr 2+2(can go +4 total) good condition---$225

LSR stem...was slightly bent, but i had it straightened..chrome--$150

Baldwin motorsports front hubs..black caps, great condition..ill throw the front brake rotor in for another $10 if u want--$250 just hubs, $260 hubs with brake rotors

Pro Curcuit T4 Pipe(just silencer) cut 4'' short...$90

Anti-fade nut.... $130

stock rear hubs w/ studs..pc'ed super mirror red---$40

rear brake caliper w/ good pads---$50

SS brake lines, rear red, front silver, R $15 F $20

o-neal low bend bars with oury grips, $45

Everything is going fast, so get it while its here!!!!

ill update the list as i sell the stuff...also might post some more thing up.

if you buy anything from me please leave feedback here: http://www.exriders.com/vbb/showthread.php?s=&postid=1062922#post1062922

just ask for stuff...
i have every thing on my quad(400ex) aftermarket, and i will sell everything, so just let me know what u need

also....feel free to call my cell phone if u have any questions.
440-361-0050

Thanks alot
Nick

Im VERY interested in the engine, where are you located???

post up some pics!

[400rider01]

pmed you

[crap-banshee32]

ill get pics of the motor and the tires asap and have them posted..

im located in North east ohio...Perry

thanks
nick

[crap-banshee32]

here are the pics..
ask questions if u have them

thanks
nick



http://www.imagestation.com/picture/sraid113/p347d928264c98665b7eadac3d26f9dd5/f8eb384c.jpg

http://www.imagestation.com/picture/sraid113/p812f7dd04ca7bf8fbfbdebbf6864c63b/f8eb3845.jpg

http://www.imagestation.com/picture/sraid113/p7cdc2a446fe94ba45d0a5880e31a6d28/f8eb3849.jpg

[crap-banshee32]

just let me know if your interested in anything

nick

[redroost85]

Bumpity bump bump for ya Nick.:)

[Chanman420q]

i think u got that rear shock on backwards

how much for the antifade?

[Xowner]

hey get on aim and im me at Xowner350X

[mtdewracing]

how much for the alluminum air box?

[Ty's400]

Are you selling the anti-fade locknut and/or pro-peg nerfbars. If so how much for each of those? If you could send some pictures to sederlund_15@hotmail.com, that'd be great! Thanks

[crap-banshee32]

ill sell the anti fade nut for $150 shipped....sound like a decent price?

and ill sell the nerfs for $130 + shipping, they have custom kick ups on them,....ill post pics soon.

thanks
nick

[crap-banshee32]

Originally posted by Chanman420q
i think u got that rear shock on backwards

how much for the antifade?

you have to put it on that way with the crf motor in there, it does not work the other way.

here are the nerfs:



http://www.imagestation.com/picture/sraid113/p2aff3eac89251bfc2f822a438f52ac3d/f8e7f192.jpg

http://www.imagestation.com/picture/sraid113/p90c4c18aeba62f256aea076261ec9e8e/f8e7f18d.jpg

[Sporttrax400ex]

hey i want the nerf bars and maybe some other stuff.

turn your aim on i need 2 ask some questions.

thanx.

[Xowner]

what kinda clutch lever and perch you got? and the front master cyl

[crap-banshee32]

i have an rtc lever and perch..

ill sell for $25

thanks
nick

[Foxrage]

I am intrested in the front tires wheels and hub. would you take 350 shipped for it? paypal you the money asap if so. Also if you need any stock stuff let me know too. Thanks

Also do you have any more pics of them closer. Thanks

[WKY400EX]

Do you have a radiator for sale? If so, how much? Thanks.

[crap-banshee32]

im selling the radiator with the frame.

the front tires and wheels are sold.

i will take $265 shipped for the hubs let me know

thanks
nick

[crap-banshee32]

sporttrax400ex...your mail box is full....so i couldnt PM u

[cals400ex]

why are you selling this engine?

i hear they make some good power. :D


you wouldn't sell the carb seperate would you?

[crap-banshee32]

im selling the engine...b/c im parting out my whole quad b/c im getting out of racing.


id like to sell the card with the motor

[WKY400EX]

If you decide to sell the radiator alone, let me know. Thanks.

[hondafreestyler]

hey Nick

Interested in rear shock and rtc clutch lever and perge ... and u get some good pics for me?

those baldwin hubs work on a 400ex right? ... also interested in those

let me know ... pm me
-Mike

[crap-banshee32]

rtc lever and perch is sold, ill get some pics of the hubs and post them by tonight..

thanks
nick


if u have AIM just IM me on there.
thanks

[hondafreestyler]

thanks nick ...

i dont have aim so ...

u still have that rear shock? ... interested in that too

[Sporttrax400ex]

nick i cant reach you on aim pm me fastest416ex.

thanx

[crap-banshee32]

still have the shock....PM me if u want it

thanks
nick

[crap-banshee32]

http://www.imagestation.com/picture/sraid114/pe8c72d69d3fb9a15fc820bb21668599d/f8e2abdd.jpg

http://www.imagestation.com/picture/sraid114/pf2c4a5ac4994cf97c1c6556476fb51fa/f8e2abdf.jpg

[rap169]

what about some aftermarket handlebars?

[crap-banshee32]

oneal.....

[Brad]

alrite nick, gimme prices on whatever carb u have and gimme the power range on that t4, and if u saw a difference between the longer one and the shortened one, and how loud appr is it

[kicker696]

how much for the rear shock, front shocks and the t4 shorty, pm witha price

[crap-banshee32]

sending PM now

[Live2Ride300]

Im interested in your Herman LT a-arms, do you have any pics of them? Thanks

[crap-banshee32]

heres a good shot of the arms and the front shock...

PM me and we can talk

heres a pichttp://www.imagestation.com/picture/sraid114/p7cddccea5be95d3f88c16b4f351adf9a/f8e245cf.jpg

[crap-banshee32]

here are pics of the rear shock

http://www.imagestation.com/picture/sraid114/p42ff6e79cd32e1d7c431d10a743083c6/f8e20560.jpg

[hondafreestyler]

Nick ...

your pm isn't working ...
so let me know about the strut and what it helps rather than the linkage

[STEVEDU2]

how about the hood and frt bumper??

[Brad]

front plastic and hood, price:

id like some info on the t4:

[crap-banshee32]

hood is sold, ill sell the bumper for $80

-------------------------------------

nick

[crap-banshee32]

hipers are sold

[crap-banshee32]

bump b4 bed;)

[atvrazin]

how much for the whole front end-a-arms tie rods and schocks spindles and hubs etc.what ever you have left

[motoman00440es]

if you still have it i am interested in your rear shock how long since it has been serviced?

[crap-banshee32]

Originally posted by atvrazin
how much for the whole front end-a-arms tie rods and schocks spindles and hubs etc.what ever you have left

shocks are sold..

ill sell the arms tie rods spindles and hubs for $910...

if u want the front brake calipers and lines 2....ill give it all 2 u for.....$1050

let me know

thanks
nick

[crap-banshee32]

Originally posted by motoman00440es
if you still have it i am interested in your rear shock how long since it has been serviced?

i still have it, its been about a 4 months since the last service.

ill throw the lowering strut that goes in the linkage so u can adjust the ride heaigh ..all for $220+ shipping

let me know
thanks
nick

[motoman00440es]

what pound rider is it set up for on what size swingarm?

thanks

[nicky slee]

Hey you got a bearing carrier that will fit stock 400ex swingarm? Thanks

[crap-banshee32]

rear shock is 200lb B rider

+1 1/4 on the swinger

let me know

[Atreyu]

How old is the frame?

[motoman00440es]

one more ? is it a Zero preload shock
and what is your e-mail addr. so i can e-mail you
i will prob. buy it

thanks i will drop you an e-mail later

[crap-banshee32]

Originally posted by Atreyu
How old is the frame?

never ridden on at all..it is brand new...

never actually got my project 450 together all the way


--------------------

the rear shock is limited mass, but i can throw in the lowering strut for the rear so that you can adjust the ride height

[crap-banshee32]

bump.....still alot of stuff for sale guys!!

[crap-banshee32]

upp b4 school

[exrider360]

nick how old are you juts c`uriouse

[crap-banshee32]

17

[DangerousDean]

what kind of rear tires?
they look like klaws?

and the plastics too, how much ? (fronts)

[crap-banshee32]

tires and rims are sold....and the hood is sold..

i still have the front plastic though....they have a big hole where the hood was..

let me know if u still are interested

[Brad]

how much for the front plastic w/ shipping

[Florida400EX]

What geometry is the frame?

[crap-banshee32]

the frame is 400ex geometry

[DangerousDean]

Originally posted by crap-banshee32
tires and rims are sold....and the hood is sold..

i still have the front plastic though....they have a big hole where the hood was..

let me know if u still are interested

hmm, no thanks

what kind of clutch lever and perch??

how loud is the short t-4 ?

edit: NM, didnt see you sold the clutch :(

[Florida400EX]

get on AIM if you can.

[crap-banshee32]

ok talk to u there...


anyone else interested in parts?


the T4 silencer isnt that loud....but deffinitly louder then with it not cut

[crap-banshee32]

bumo

[Guy400]

For anyone considering dealing with this guy:
http://www.exriders.com/vbb/showthread.php?s=&threadid=104676

[crap-banshee32]

that was only one bad mishap, and i really dont think it was my fault since i never experianced any troubles with the carb what so ever.

for more of my feedback go here, and i have more good feedback coming from the parts i have already parted out

http://www.exriders.com/vbb/showthread.php?s=&threadid=93332


Nick

[Florida400EX]

dude, IM me again. TeamECCRM125

[HiperEX]

do u still have the bars and tether kill?

[crap-banshee32]

yes i do....let me know if u want them

thanks
nick

[Quad18star]

Were you running a 400ex throttle assembly?? If so do you still have it and how much for it??

[Atreyu]

Still have the rear shock?

[WKY400EX]

Still have the T4? How much shipped to: 42450? Thanks.

[crap-banshee32]

throttle...$40 shipped...do u need the cable?

rear shock $220

T4 for $110 shipped to KY

let me know guys

thanks
nick

[crap-banshee32]

front calipers and spindles are sold



come on ppl...i still have a ton of nice stuff for sale

[crap-banshee32]

bump....for sale list updated

[WKY400EX]

I might be interested in the silencer and a-arms. I'll have to let you know a little later today.

[crap-banshee32]

ok, just let me know

[WKY400EX]

Nick, could you give me an ID (inside diameter) measurement where the silencer slips over the pipe? I want to see if it will slip over my headpipe. Please let me know. Thanks.

[dougb77]

whats your bottom dollar since the stem has been bent once before and will it fit fatbars. how much for the rear fender

[dougb77]

I forgot about your brakelines too i want those

[crap-banshee32]

ill get that measurement tomorrow.

do u want front and rear brake lines? or what?

i wont ship plastic, it costs to much

$150 is my bottom dollar on the stem!

let me know guys

thanks
nick

[WKY400EX]

Did you get that measurement Nick? If it'll work, I'm interested.

[nicky slee]

What color pc is the swingarm and does it come with bearing carrier

[crap-banshee32]

swing arm is super mirrow red adn i can throw in the carrier for a little extra

ill get that measurement soon, ive been kinda busy

nick

[nicky slee]

What about just the carrier by itself how much?

[crap-banshee32]

inside diameter on the silencer is 1 1/2 inches.

ill sell just the carrier for $80

let me know guys

thanks
nick

[nicky slee]

How are the bearings in the carrier?Will i need to buy new ones?

[crap-banshee32]

bearings are still good.

WKY400EX, there is a pic of the headpipe on page 2 of this thread.


let me know guys

[CTmxyfz]

you have the 400 thumb throttle?

[crap-banshee32]

i thought i had it sold, but the guy has not contacted me after i gave him my shipping address. so im gunna wait a couple more days to c if i hear from him or get the money, then ill let u know!!

[crap-banshee32]

tie rod ends are sold.

[crap-banshee32]

the motor is now on ebay, go check it out, only a few days left!!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7901646170&category=35572

[CTmxyfz]

let me know Nick about the throttle.