clutch, whats up with it???

[400extracc]

i dont have the chain hooked up, but when i put it in gear and pull the clutch in, the front sprocket moves. the cluch is adjusted all the way at the motor end. anyone nows what this could be??

and how to fix it??? i have an after market leaver.


thx

[400extracc]

anyone????

[James Parent]

first make sure the clutch is fully disengaged when its pulled in..

[Bill Fuller]

it's normal,don't worry.

Originally posted by Bill Fuller
it's normal,don't worry. trhTA QHt I thought...we had my four wheeler up off the ground & we would pull the clutch in & leave it in 1st gear & the rear wheels would barely move

[PhilMoore]

What you are describing sounds normal. Some I have seen will even rotate the rear wheels if the engine is not fully warmed up. Why are you concerned?

Does the machine feel jumpy or twichy when you are sitting still with the clutch pulled in in first gear? If so, the basket could have grooves in it that are preventing the plates from separating properly.

[400extracc]

if its not a problem then i am not concerned!!! thats why i asked.

thx all:macho

[toby400ex]

Yeah dont worry, my front sprocket will turn really slow even when its in nuetral and has no chain.