PDA

View Full Version : What weight oil



QuAdEr 317
04-03-2004, 01:23 PM
i have a 2002 400ex im in new jersey n it is starting to get warm..should i use 10w-40 or 20w-50

beak7707
04-03-2004, 02:38 PM
I run 10-40 year around in Indiana, in my 300ex. Never had any problems, I would run 10-40.

QuAdEr 317
04-03-2004, 05:30 PM
thanks a lot........ne other suggestions ne1?

KY Woods Rider
04-03-2004, 11:25 PM
I run 10w-40 year round in relatively stock motors. I've done this with several quads and have never had any problems, so I don't see any reason to change.

For big bore motors that I plan to run hard, I switch to 20w-50 when the temp gets above 60°.

2002400ex
04-28-2004, 09:49 PM
i have hot summers here in BAMA. i use Mobil 1 20w-50

2002400ex
04-29-2004, 12:27 PM
*i meant 15w-50

04-29-2004, 01:25 PM
Id run 10w 40;)

TC426EX
05-12-2004, 07:55 AM
I HAVE ALWAYS RUN 20W50. I HAVE A BUILT 426 MOTOR BY TC AND THATS THE WEIGHT THEY SAID TO RUN. I ALSO HAVE A FULL HINSON CLUTCH AND THEY ALSO SAID 20W50. THEIR REASONING IS THAT IT IS A LITTLE THICKER AND THE SAME OIL THAT LUBES THE CYLINDER LUBES THE CLUTCH. IF YOU RUN THE HEAVIER OIL IT SHOULD NOT BREAK DOWN AS QUICKLY AND HELP KEEP YOUR CLUTCH FROM FRYING ITSELF AND SLIPPING. I HAVE HAD NO PROBLEMS SINCE I SWITCHED TO THE 20W50 AND I RIDE MY QUAD TO ITS FULL POTENTIAL ALL THE TIME.

-PAUL
TC426EX
-PEP, LAEGER, ARENS, ETC.....

redroost85
05-12-2004, 08:21 AM
I run Amsoil 0w/40 year 'round.;)