WB E-Series quality issues?

[PunkA$$]

I've heard alot of people saying that they have had the welds cracking on their e-series silencers. Are you refering to the S-bend or pro meg?? I just bought and installed an S-bend silencer and am very pleased with the power gains, however I will be considerably less pleased if it falls off my quad. Any input is appreciated.

[Hondaluva]

I haven't had any trouble yet...but I am still learning to jump. We'll see.

[mustang]

just keep the mounting bolt real tight, you should be fine;)

[dingo]

I have heard that the e-series had some wield problems a year ago myself but I have not had any problems with mine and was told that they fixed that some problem with if falling off.

[duncanracing400]

my weld that is holding on the bracket to the bracket that is to the right of the bracket that comes with the billet piece :( but its all crunk

[infantry317]

Mine broke off completely where the pipe meets the cone. They added that little weld tab on the newer ones. I had mine re-welded, so far so good after a year.

[hondarider2006]

I have one of the newer ones with the brackets and it also cracked...got it welded and about 6 months later it cracked ALL over again. I have posted this picture about 20 times, but its all I have to show where it cracked last time. This time it cracked in about the same places.

http://www.imagestation.com/picture/sraid89/p21d25d1d85a1bb28c96a7d03264702c1/fa8a3e23.jpg

[PunkA$$]

has anyone tried to rubber mount this pipe like the stocker is??

[F-16Guy]

Originally posted by Punk*****
has anyone tried to rubber mount this pipe like the stocker is??
I did. I sawed off the piece of upper mount that goes through the subframe and reinstalled the original rubber mount. I had to do a little shimming to get the fit just right, but now it's mounted firmly but with a little flex. I did this while I had my pipe off to fix the cracks:p So far, so good.

[mustang93]

Do the other slipon companys use a ridged mount like WB or the stock rubber mount?