Brake rotor hug

[Matt400ex_17]

i cannot get the rear brake rote hub off of my stock axle is there any special tools or anything that i can pull it off with. Ive tried heating it and hitting it with rubber mallet and it is not even budging any ideas???

[Cole Trane]

Mine was a pain, but I just kept at it and it finally came off.

[44oEX]

Hit the end of the axle ( like to take it out ) with a sledge hammer and just put a piece of wood on the end so you don't damage it and hit as hard as you can. If you took out the nuts it will come right out you don't need any thing special . It just need a little help to come out ( big hammer )

[44oEX]

if that doesn't work get a bigger hammer:D

did you remove axle clip:confused:

[Matt400ex_17]

What is the axle clip i removed everything the repair manual said too. Is that the big e-clip on the inside of the hub closer to the bearing carrier? thats off!

[44oEX]

no the clip is the one that hold the nuts.If everything is off just hit it hard

[Matt400ex_17]

10 lb sledge worked thanx for the help appreciate it. getting lonestar anti fade now screw that oem crap......