 |
ZTR Mini
ATV Locknut
|
Boswell, OK (1/9/2009)
- The processing
used to produce our new anti-fade nut is revolutionary.
Instead of the typical anti-fade nut that has
a slot and 2 bolts to tight, forcing it to pinch
the thread, the Z-Nut looks like a simple straight-forward
nut with a hint of sizzle. (the sizzle is what
keeps the Z-Nut from loosing)
A direct consequence of the simplified Z-Nut
is the reduction in machining and labor with
allows for a more cost effective way to build
an anti-fade nut and is reflected in the retail
price.
 |
Zero Tolerance
Racing products Mini ATV Z-Nut
|
FYI: Note that the flange is installed against
the hub, the engraving will not show! In order
for the Z-Nut to work it must be installed this
way. Recommended torque of 75-100 ft/lbs as
well (tighten about 10% more than a typical
axle nut). The added torque will not be transferred
to the bearing inside the carrier, it will be
absorbed by the Z-Nut.
No longer a need to use loc-tite, tape or imagination
to keep the axle nuts tight.
MSRP: $44.99
