|
Roll Design's
Dustin Nelson Captures Second Place at WORCS
Honolulu Hills - Round 1 - Taft, CA - January
21-23, 2011
 |
| Roll
Design's #94 Dustin Nelson- Yamaha YFZ450R
ATV |
Fallbrook, CA (1/28/2011) - #94
Dustin Nelson Yamaha / Roll Design / Elka Suspension
captures 2nd place at the opening round of the 2011
WORCS ATV series held at Honolulu Hills MX in Taft
California on January 23, 2011.
Dustin Nelson earned a 4th Overall from the 2010
WORCS series and came
out strong for the 2011 WORCS ATV series capturing
a 2nd Place Finish
for the opening round. The weather and track were
ideal conditions for
the 1st WORCS ATV round.
Honolulu Hills has been the ending round of the
series for the past
years and is commonly very dusty. However, that
would not be the case
this year as the mountain sides were green, weather
was great and
dusty conditions were very low. The track was
very high speed, a mix
of some motocross, huge jumps, high speed and
tight technical sections.
Doug Roll and Erik Westergaard from Roll Design/Elka
Service Center
were trackside to help out with the challenging
setups needed for the
track conditions. Roll/Elka Service Center track
support rig was also
onsite for the 2011 WORCS ATV season to assist
riders’ setup their
quads for the race (on any Roll Design or Elka
Suspension equipped
quads). Elka Suspension newly released Stage 5
shocks can also be seen
on Dustin Nelson’s Yamaha GYTR YZF450R.
Saturday Pro Practice would be the first time
riders would get to ride
the entire course and get a good qualifying time
for gate pick. Nelson
was the 4th Fastest for the day giving him a great
gate pick for the
ever tricky first turn.
Nelson would quickly take the second spot during
the 1st lap of the
Main Event as he chased down the leader Can-Am
rider Jeremie Warnia
(#62), followed by last years WORCS Champion Josh
Frederick (#1).
Uncontested for most of the race, Nelson would
clip a banner on the
last lap which closed the gap back to 3rd Position.
Losing his 10
second gap over 3rd Place would setup a last lap
battle to the
checkers between himself and Frederick. Nelson
held off Frederick
claiming the 2nd Place spot for the opening round
of the WORCS ATV
season.
“The Elka Stage 5’s and Roll Suspension
worked great, I can’t thank
them enough!”-Exclaimed Nelson after the
race.
Roll Design/Elka Suspension dominated the Pro
Division with (7) seven
different riders in the Pro Class for the opening
round, Dustin
Nelson, Josh Row, Beau Baron, Davi Haagsma, Jarrod
McClure, John
Shafe, Robbie Mitchell, and Mike Cafro. Roll Design
riders finished
2, 6, 7, 8, 9, 10 &11 respectively.
WORCS heads to Primm, Nevada Feb 26-27 for the
second round. Be sure to stop by the Roll Design/Elka
Service Center rig and cheer on your favorite
rider during the next round.
About Roll Design
Roll Design manufacturers
high-end suspension and handling components for
ATV’s. Doug Roll started the company in
1988 with the idea to build the best ATV off-road
racing suspensions on the market. After 22 years,
Roll Design control arms and steering shafts have
won more off-road races, in the toughest conditions
such as the Baja and Dakar than any other ATV
suspension manufacturer in existence. Roll Design
products are 100% made in the USA in Fallbrook,
CA with the highest quality standards and components
available in the industry. Roll Design is also
a USA Factory Authorized Service Center for Elka
Suspension. You can lean more about Roll Design
at www.rolldesign.com
& www.elkaservicecenter.com
www.rolldesign.com
Discuss
this in ATVriders.com Forum
| 
