 |
The
X series shocks are available for front and
rear in a variety of configurations |
Logan, UT (11/6/2007) - EXIT
Shocks, a manufacturer of premium shock absorbers
for ATV’s and Snowmobiles has developed and
released a new line of shock absorbers for ATV’s
and SideXSide’s. The X series shocks are available
for front and rear in a variety of configurations.
This line of shocks from EXIT is designated by the
X and the number following represents the number of
adjustments on that model for example the X1 model
has one form of external adjustment. For the front
EXIT offers a piggy back reservoir non-adjustable
X0, piggy back reservoir compression adjustable X1,
and piggy back reservoir compression and rebound adjustable
X2. For the rear EXIT offers a remote reservoir compression
adjustable X1 shock and a remote reservoir compression
and rebound adjustable X2. These shocks are available
for most late model ATV’s and SideXSide’s
and can be used with the stock suspension components
or with ARS-FX a-arms, linkages, and swingarms.
EXIT Shocks use either one, two, or three
springs made of high tensile silicone wire, both
of the smaller tender springs and the main spring
use different spring rates. Triple or dual rate
springs allow the shock to be tuned for small, medium,
and large impacts and the dampening can be adjusted
externally. This allows the suspension to be easily
tuned by changing the springs and crossovers. The
EXIT X-series shocks have been developed by renowned
suspension expert Mike Hallock and combine more
than 15 years of suspension design experience. Almost
everything on the shock body is custom machined
from billet aluminum to very tight tolerances to
give the shock very consistent results.
Each shock is custom built for application,
rider weight, and riding style. In addition all
shocks have been designed so that the flow of the
hydraulic fluid remains smooth and consistent through
the entire shock. The bridge or line going to the
reservoir is specially designed so the dampening
is more effective and not restricted by a small
line and thereby keeping temperatures lower. This
prevents the dampening from fading as the shock
heats up.
The release of the EXIT X-series shocks
is a big step forward for ZBroz Racing because it
is allows them to offer a full suspension kit including
ARS-FX a-arms and EXIT Shocks that are designed
to work together.
About EXIT:
ZBroz Racing
distributes and manufactures premium suspension
products for ATV’s and Snowmobiles under the
banner of EXIT Shocks and ARS-FX. Building on many
years of snowmobile racing experience the Zollinger
brothers formed ZBroz Racing to meet the growing
need for upgraded suspension products. ARS-FX currently
offers a range of suspension products including
a-arms, swing-arms, steering stems, and bar clamps
while EXIT offers the accompanying shock absorbers.
For more information on ZBroz Racing please visit
www.ars-fx.com
or call 435-753-7774
www.ars-fx.com
(435) 753-7774
Discuss
this in ATVriders.com Forum
